Mini Alarm Sensor Plastic ABS Anti Theft Tablet Stand
This product is a security anti-theft display device that can be
used in digital products such as mobile phones, tablet, laptops,
camera etc. Once the product is off or cut off the wire, can
immediately issue a high decibel alarm sound, and a red light
flashes.
Specification of Smart Security Display Alarm Stand:
| Material: | Plastic ABS |
| Host Size: | 55*34*21mm |
| Color: | white, black |
| Operating Voltage: | 3V (built-in) |
| Line Diameter: | 2mm |
| Calbe length: | 50cm, extended 120cm |
| Alarm Sound: | 100DB |
| Alarm Modes: | Sound and Light Alarm |
| Sensor: | Various Sensor Heads, Round Plastic/Metal, Cord Loop, Flat, Arc,
etc |
| Function: | Anti-theft, Alarm, Security Display |
| Packing List: | 1 Alarm Host Cable, 1 Remote |
| Unite Weight: | 25g |
| Warranty: | 1 Year |
Features of Smart Security Display Alarm Stand:
Widely Work for All Display Stands
Small Size, Low Voltage, Ultra-low Power Design
Sound and Light Alarm, High Decibel Alarm Sound to Deter Thieves
Low Power Consumption, Super Long Standby
Built-in CR2032 Button Battery Can be Replaced After Use Up
The Alarm is Not Disturbed by Ambient Radio Waves and Other Signals
Independent Built-in Power Supply, No Need to Supply External Power
Cord
The Imported 3M Adhesive Will Not Leave Unwanted Glue Marks on the
Surface of the Product
Easy to Install, Easy to Operate, Stick on Both Ends, Automatically
into the State of Deployment
The Remote Control is Easily and Conveniently defenced and defused
Universal Display for Various Brand Phones, Tablets, Watches, PC,
Shaver, Handbag, etc
Apply to Mobile Phone Mall, Bank, Restaurant, Exhibition,
Electronic Shop, Digital Store, etc
Various of Sensor Heads Optional:
Round Head Type is Applicable to All Electronic and Digital
Products, Like phone, tablet, PC note, etc.
Flat Type is Applicable to All Arc Products, Like Shaver,
Intelligent Speakers, etc.
Spring Rope Type is Applicable to All Kinds of Handbags and Other
Merchandise.
Rectangle Metal Type is Applicable to All Kinds of Watches and
Other Similar Commdities.
Damaging Anyone of Above Three Will Alarm:
1. Cut the Cable
2. Unplug Adhesive Joint
3. Unplug Alarm Host
How to Install:
1. Turn on the Switch on the Host Bottom to "On"
2. Take Off the 3M Sticker on the Bottom of Sensor
3. Stick Sensor on the Surface of Product You Need to Protect
4. Stick Host on the Appointed Item, Blue Light Flash Once and
Autonmatically Enter the Defensive State
5. If There is A Disconnect Alarm, Can Use Remote Control to
Cancel, or Turn on the Switch on Host Bottom to "Off"
